ENTERASYS C2RPS-PSM

Description

• • Type: Redundant Power Supply Module (RPS)
  • AC input voltage range: 85–264 VAC
  • AC input frequency: 47–63 Hz
  • Output voltage: 12 VDC
  • Output current: 1.0 A min., 8.5 A or 13.0 A max.
  • Maximum continuous output power: 102 W or 156 W
  • Dimensions: 19.6 cm H × 5.2 cm W × 25.7 cm D
  • Net weight: 1.75 kg
  • MTBF: 300,000 hours
  • Hot swap: Supported
• Key Features: Hot-swappable design, front-panel status LED (PWR / OK / Alert), up to 150 W continuous 12 VDC output, redundant backup for SecureStack C2.
• Functional Characteristics: Provides N+1 redundancy; automatically takes over when the primary PSU fails; LED indicates input presence, normal output, or over-temperature/fan alarm.
• Application Scenarios: Enterprise networks, data centers, industrial automation networks where uptime of Enterasys SecureStack C2/A2/A4 non-PoE switches is critical.
• Structural Characteristics: External redundant power supply module that plugs into a compatible chassis (e.g., C2RPS-CHAS2/CHAS8) and connects to the switch via a keyed DC power/monitor cable.
• Working Principle: Converts 85–264 VAC input to a stable 12 VDC output; continuously monitors its own health and reports via front-panel LEDs; provides seamless power takeover in case of primary PSU failure.
• Installation Requirements: Install into the C2RPS chassis, connect the keyed DC cable to the SecureStack C2 switch, and ensure AC input is within 85–264 VAC range.
• Usage Notes: Perform initial no-load test (insert C2RPS-PSM, confirm OK LED green) before connecting to a live switch; do not mix with PoE modules (C2RPS-POE); observe 0°C to +50°C operating temperature for control room deployment.