Product Short Description
Product Name: Emerson 5X00497G01 High-density Digital I/O Module
Product Series: Emerson Ovation Series Integrated I/O Module
Product Brief: High-density integrated digital input and output module for Ovation DCS system. It integrates digital input and output functions into one unit, realizing signal collection and on-off control simultaneously, and is used for general logic control of process industrial sites.
Description
- Module Power Supply: 24 V DC
- Operating Temperature: 0 °C ~ +60 °C
- Storage Temperature: -25 °C ~ +70 °C
- Relative Humidity: 5% ~ 95% RH (Non-condensing)
- Input Channels: 8 isolated digital input channels
- Output Channels: 8 isolated digital output channels
- Output Rated Current: 0.8 A per channel
- Isolation Voltage: 2200 V AC
- Integrated digital signal acquisition and switching control output
- Full-channel electrical isolation between input and output circuits
- Over-current, short-circuit and reverse voltage protection for all channels
- Independent LED status indication for each input and output channel
- Hardware signal filtering to suppress field interference
- Seamless data interaction with Ovation DCS main controller
- Total Power Consumption: ≤ 8.5 W
- Channel Response Time: ≤ 0.3 ms
- Insulation Resistance: ≥ 120 MΩ
- Vibration Resistance: 10 Hz ~ 150 Hz, 0.7 g
- MTBF: ≥ 103000 hours
- Main PCB: High-density FR-4 multilayer flame-retardant PCB
- Enclosure: Flame-retardant anti-aging engineering plastic
- Core Components: Optocouplers, drive transistors, protection components
- Terminal Blocks: Combined vibration-resistant terminals with copper contacts
- Internal Components: Insulation isolation baffles between input and output areas
- DCS dedicated rack-mounted modular structure
- Front panel divided into input terminal area and output terminal area with clear marking
- Rear side equipped with dedicated backplane bus connector
- Internal isolation baffle separates input circuit and output circuit completely
- Compact layout to realize high-density I/O integration
Field digital switching signals are collected by input circuits, processed by isolation and filtering, and uploaded to DCS main controller. The main controller sends out control commands, which are converted into switching signals by output drive circuits to control field actuators. The isolation structure and protection circuit prevent mutual interference and fault spread between input and output loops.
- Integrated I/O design, reduce module quantity and cabinet wiring workload
- High channel density, effectively save DCS cabinet installation space
- Complete electrical isolation between input and output, high system safety
- Comprehensive protection functions, adapt to complex on-site working conditions
- Unified mechanical size and communication protocol with Ovation series modules
Thermal power auxiliary system control, chemical workshop logic control, water treatment automation, packaging and conveying equipment control
- Install on standard Ovation DCS rack, ensure connector full engagement
- Input signal lines and output load lines are routed separately
- All wiring terminals are tightened to prevent loose contact under vibration
- Maintain stable temperature and dry environment inside DCS cabinet
- Implement unified protective grounding for the whole rack system
- Perform all wiring and maintenance work under rack power-off state
- Do not make output channels work under long-term overload condition
- Clean dust on module surface and terminals periodically
- Avoid liquid and corrosive gas erosion
- Check channel status regularly during long-term continuous operation
Reviews
There are no reviews yet.