Rexroth LTS350D0608750125

Description

Technical Specifications:

• Order Number: 0608750125
• Control Voltage: +24 V / -24 V / 5 V
• 3-phase Output Voltage: 0 ~ 230 VAC
• Output Frequency: 0 ~ 1000 Hz
• Output Current: 12 A continuous, 50 A peak
• Dimension: 46 mm × 271 mm × 285 mm
• Protection Class: IP20 (after rack installation)
• Operating Temperature: 0 ~ 55 ℃ with forced cooling
• Storage Temperature: -20 ℃ ~ 70 ℃
• Humidity: 20% ~ 90% non-condensing

Function Features: Integrated motor contactor, built-in 4-line LC display showing torque, angle and error codes, E-stop function meeting PL d safety level, dedicated tightening spindle interface, digital parameter communication with SE control unit.

Application Scenarios: Automotive assembly tightening stations, automated screwing spindle systems, industrial assembly line torque control, electronic product precision assembly.

Material Composition: Metal card housing, power IGBT module, microprocessor control board, liquid crystal display module, relay and contactor components, heat sink structure.

Structural Features: Rack plug-in card design for BT356 card rack or SB356 enclosure, front panel display and status LEDs, 14-pin combined power and signal connector, integrated cooling fan.

Working Principle: Receives torque and angle control commands from upper SE controller, controls EC motor current and speed in real time, feeds back actual torque and angle values to realize closed-loop tightening control.

Installation Requirements: Plug into compatible BT356 rack; connect motor power cable and control signal cable correctly; ensure cooling fan air duct is unobstructed; configure system parameters via control panel.

Usage Notes: IP20 protection grade, only operate inside closed control cabinet; match parameters with tightening spindle system; verify E-stop circuit wiring before operation; perform torque calibration regularly.