Product Short Description
Product Name: 8LSA Three-Phase Synchronous Servo Motor (Size 2, No Brake)
Product Introduction: The 8LSA25R0060D000-0 is a brushless permanent-magnet synchronous servo motor of B&R’s 8LS family, frame size 2, length 5, 6000 rpm rated, resolver feedback, smooth shaft, no holding brake, intended for ACOPOS drive families.
Description
Technical Specifications:
- Rated speed: 6000 rpm
- Rated torque: 0.52 Nm
- Rated power: 327 W
- Rated current: 0.71 A
- Stall torque: 0.60 Nm
- Peak torque: 2.4 Nm
- Max speed: 9000 rpm
- Torque constant: 0.73 Nm/A
- Voltage constant: 43.98 V/1000 rpm
- Pole pairs: 4
- Feedback: 2-pole resolver
- Shaft: smooth, no key
- Brake: none
- Connector: rotatable right-angle plug
- Protection: IP65 (shaft side without seal lower)
- Cooling: self-convection
Functional Features: Low inertia for high dynamic response, resolver robust against contamination, plug-and-play via ACOPOS auto-parameter read, rare-earth magnet rotor.
Working Principle: Standard PMSM under field-oriented control; resolver feeds rotor angle to ACOPOS which modulates three-phase current for torque/speed loop.
Application Scenarios: Packaging machine pick-place axes, small CNC feed drives, lab automation rotary stages, textile guide rollers.
Structural Characteristics: Compact square-flange size 2 (≈58 mm flange), aluminum housing, end-cap resolver, swivel connector at rear, no brake stack.
Installation Requirements: B5 flange or foot bracket; shaft coupling concentricity within motor tolerance; separate encoder cable from power cable; avoid axial shaft load beyond catalog limit.
Usage Notes: Resolver shielding mandatory; do not operate above 9000 rpm; no brake means vertical axis needs external hold; match ACOPOS current rating to 0.71 A rated / 3.7 A peak.
Reviews
There are no reviews yet.