Product Short Description
Product Name: Triconex 2301 Trident Digital Input Module (Baseplate Kit)
Product Introduction:
The Triconex 2301 is a safety-rated discrete (digital) input module baseplate within the Triconex Trident safety system platform. It acquires on/off field signals and feeds them into the triple-modular-redundant (TMR) safety logic solver for emergency shutdown (ESD), burner management, and other critical safety functions.
Description
Technical Specifications:
-
Manufacturer: Triconex (Schneider Electric)
-
Product Type: Digital Input Module / Baseplate Kit
-
Input Channels: 8 discrete input channels
-
Signal Type: Dry contact / PNP-type digital signals
-
Voltage Range: 12 to 24 V DC (nominal 24 V DC, ±10%)
-
Safety Integrity Level: SIL 3 (per IEC 61508)
-
Redundancy Architecture: Triple Modular Redundant (TMR)
-
Noise Immunity: 5 V peak-to-peak
-
Operating Temperature: –40 °C to 70 °C (some sources state –40 °C to 85 °C)
-
Hot-Swap Support: Yes
-
Mounting: 35 mm DIN rail (standard)
-
Compatible Controllers: Triconex 3000 / 5000 / 7000 series
-
Dimensions: 165 mm × 80 mm × 40 mm
-
Weight: Approximately 1.0 kg
Functional Characteristics:
-
TMR architecture ensures continued operation despite a single-point failure
-
5 V peak-to-peak noise immunity for reliable signal acquisition in electrically hostile environments
-
Hot-swappable design minimizes process downtime during maintenance
-
SIL 3 certification meets the strictest international functional safety standards
Working Principle:
Three independent input channels simultaneously read the same field contact state. The TMR logic compares the three readings; if one channel disagrees due to a fault, the majority vote determines the true state, and the faulty channel is flagged for maintenance — all without interrupting the safety function.
Application Scenarios:
-
Emergency Shutdown (ESD) systems in oil & gas
-
Gas Detection Systems (GDS)
-
Turbine protection systems
-
Burner Management Systems (BMS)
-
Critical process interruption in chemical and petrochemical plants
-
Power generation turbine control
Installation Requirements:
-
Mount on a 35 mm DIN rail within the Trident chassis
-
Wire field contacts to the baseplate terminals with proper shielding
-
Provide 24 V DC power within the ±10% tolerance band
-
Ensure ambient temperature remains within –40 °C to 70 °C
Usage Notes:
-
Do not exceed the 24 V DC ±10% supply range
-
Verify SIL 3 loop calculations before deployment
-
Use hot-swap capability only after confirming system fault tolerance
-
Periodic proof-testing is required to maintain SIL 3 certification
Reviews
There are no reviews yet.