Product Short Description
Product Series: B&R 4D Series Digital Control Module
Product Brief: High-stability digital control module of B&R 4D series, model 4D1042.00-090 is a standard specification product, applied to digital logic control, on-site signal driving and equipment sequential control in industrial automation systems, as the core execution unit of distributed control system.
Description
- Input Power: 24 V DC
- Operating Ambient Temperature: -25 °C ~ +72 °C
- Storage Temperature: -40 °C ~ +88 °C
- Working Humidity: 5% ~ 96% RH (Non-condensing)
- Digital Input Level: 24 V DC standard industrial level
- Digital Output Load Capacity: Rated 0.5 A per channel
- Channel Response Speed: ≤ 0.8 ms
Functional Features:
- Mass digital signal input collection and logic operation
- High-current digital signal output drive for on-site actuators
- Over-load, short-circuit and reverse-connection protection for output channels
- Module running status and channel fault indication function
- Support hot swap function under system allowable conditions
Performance Parameters:
- Total Power Consumption: ≤ 11 W
- Insulation Resistance: ≥ 120 MΩ
- Dielectric Withstand Voltage: 1600 V AC
- Vibration Resistance: 8 Hz ~ 160 Hz, 0.9 g
- MTBF: ≥ 108000 hours
Material Composition:
- Main Board: FR-4 high-temperature flame-retardant multilayer PCB
- Outer Housing: Industrial-grade flame-retardant ABS plastic
- Drive Components: High-power industrial optocouplers and drive transistors
- Terminal Parts: PA66 reinforced plastic base + copper alloy contacts
- Internal Structural Parts: High-strength insulating brackets and fixed parts
Structural Characteristics:
- Standard DIN rail installation structure, vertical installation mode
- Module front side centralized terminal layout, clear serial number identification
- Internal layered circuit design, separate layout of input circuit and output circuit
- Integrated heat dissipation grooves on the shell surface to enhance natural heat dissipation
- Left and right locking buckles for firm combination with adjacent modules
Working Principle:
The module collects digital switching signals from on-site travel switches, proximity switches and other sensors through the input circuit, transmits the signals to the internal logic unit for processing. According to the control program and upper computer commands, the internal drive circuit outputs digital switching signals to control contactors, solenoid valves and other actuators. The built-in protection circuit will cut off the faulty channel immediately when output overload or short circuit occurs.
Advantages & Highlights:
- Strong load driving capability, directly drive most industrial low-power actuators
- Comprehensive multi-protection design, effectively avoid equipment damage caused by faults
- Wide temperature adaptation, stable operation in complex workshop environment
- Hot swap support, reduce system downtime during maintenance
- High integration, simplify on-site wiring and system structure
Applicable Industries: General mechanical equipment, water treatment automation, construction machinery, food and beverage machinery, logistics conveying equipment, hydraulic and pneumatic control systems
Installation Requirements:
- Fixed installation on 35 mm standard DIN rail in sealed industrial control cabinet
- The module shall be installed vertically, and the heat dissipation grooves shall not be blocked
- Power lines and signal lines shall be routed in separate wire ducts
- The cabinet grounding system must be complete and reliable
- Leave a gap of ≥ 10 mm between the top and bottom of the module and other components
Usage Notes:
- Strictly follow the rated load parameters, do not connect over-load equipment to output channels
- Avoid using in environments with flammable gas and explosive dust
- Check the tightness of terminal connections and dust removal every 4 months
- Do not expose the module to direct sunlight and strong hot air blowing
- When hot swapping, follow the official operation steps of B&R system
Reviews
There are no reviews yet.