GE IC698PSA100

• Output Power:
  • Total power: 100 W (shared across three outputs)
  • +5 VDC: 4.875–5.25 V, 0–20 A (nominal 5.1 VDC)
  • +12 VDC: 11.64–12.6 V, 0–2 A (nominal +12 VDC)
  • -12 VDC: -11.64 to -12.6 V, 0–1 A (nominal -12 VDC)
• Power Factor Correction: Yes (for AC operation)
• Isolation Voltage: 1500 VDC
• Operating Temperature: 0°C to 60°C (32°F to 140°F)
• Storage Temperature: -40°C to 85°C (-40°F to 185°F)
• Dimensions: 455.1 mm (length) × 120 mm (height) × 200 mm (depth)
• Weight: Approximately 15 kg
• Mounting: Slot 0 in RX7i standard rack
• Certifications: Class 1 Division 2 certified

Functional Features

• Redundant Power Support: Enables parallel operation with another IC698PSA100 module for 1+1 or N+1 redundancy, ensuring uninterrupted power supply during single-module failures.
• Comprehensive Protection: Overvoltage, overcurrent, short-circuit, and overtemperature protection with automatic restart (configurable).
• Hot-Swappable Design: Allows installation or replacement without powering down the system, minimizing downtime.
• LED Indicators: Provides real-time status feedback for power presence, output health, and fault conditions.
• Wide Input Range: Compatible with global AC and DC power standards, accommodating voltage fluctuations.
• Low Power Loss: Minimal voltage drop and efficient power conversion reduce energy waste.

Application Scenarios

• Critical Control Systems: Used in chemical plants, boilers, and nuclear facilities where continuous PLC operation is essential.
• Water Treatment Plants: Powers multi-I/O modules, communication modules, and CPUs in central monitoring stations for 24/7 operation.
• Energy Management: Ensures reliable data acquisition and control in substations and power distribution networks.
• High-Availability Manufacturing: Prevents production line shutdowns due to power failures in automotive, electronics, and pharmaceutical industries.
• Transportation Systems: Supports traffic signal control and railway signaling with fault-tolerant power solutions.

Additional Notes

• The module must be installed in a compatible RX7i rack system and cannot be used as a standalone power supply.
• For redundant configurations, identical models and batches are recommended to ensure consistent current sharing.
• Regular inspection of ventilation and cleaning of dust accumulation is advised to prevent overheating.
• If the “Fault” LED illuminates, disconnect power and check for output shorts or module defects before replacement.