Product Short Description
Product Introduction:
The IC200MDL750 is a high-density 32-point discrete output module for GE Fanuc’s VersaMax PLC system, configured as two groups of 16 sourcing outputs each, designed for positive logic (sourcing) load switching with 12/24VDC industrial devices. It delivers 0.5A continuous current per channel with 2.0A inrush capacity for 100ms, supporting inductive loads like solenoids and relays. The module is backplane-powered (5VDC @ 90mA max) and requires external field power (10.2–30VDC), with group-level isolation (250VAC continuous, 1500VAC for 1 minute) between the two 16-point groups. It features individual green LEDs for each output’s on/off status, plus FLD PWR (field power) and OK (backplane power/communication) LEDs for real-time diagnostics, integrating seamlessly with VersaMax CPUs/NIUs to drive discrete loads in space-constrained industrial automation applications.
Description
- Technical Specifications:
- Output Configuration: 32 discrete sourcing outputs (2 groups × 16 channels; no channel-to-channel isolation)
- Field Voltage: 10.2–30VDC (nominal 12/24VDC; 12VDC requires IC200MDL750B or later)
- Output Current: 0.5A continuous per channel; 2.0A inrush for 100ms (max)
- Response Time: ON ≤0.2ms; OFF ≤1.0ms
- Leakage Current: ≤0.5mA at 30VDC
- Isolation: Group-level isolation (250VAC continuous field-to-logic; 1500VAC for 1 minute surge)
- Backplane Power: 5VDC @ 90mA max
- Terminals: Screw terminals; shared DC+/- per 16-point group; shorting bars for bussed connections
- Dimensions: 117mm × 80mm × 47mm (width × height × depth)
- Weight: 0.14kg (0.31 lbs)
- Environmental Ratings: Operating 0°C to +60°C; storage -40°C to +85°C; humidity 5%–95% (non-condensing)
- LED Indicators: 32 green (output on/off); FLD PWR (field power present); OK (backplane power/communication active)
- Protection: Electronic short-circuit/overcurrent protection; no internal fuses per channel
- Function Features:
- High-Density Outputs: 32 points in two 16-point groups reduce carrier space and wiring complexity
- Inrush Handling: 2.0A inrush capacity reliably drives inductive loads (solenoids, relays, contactors)
- Group-Level Isolation: Prevents cross-group interference and protects backplane logic circuits
- Real-Time Diagnostics: Individual output LEDs and FLD PWR/OK LEDs enable quick troubleshooting of power/signal issues
- Positive Logic Compatibility: Works with standard 24VDC industrial sensors and actuators
- Flexible Wiring: Shared DC+/- per group with shorting bar support for efficient bussed connections
- Fast Response: 0.2ms ON/1.0ms OFF times for high-speed control applications
- Application Scenarios:
- Manufacturing Automation: Automotive assembly, packaging lines, and electronics production for high-channel-count solenoid/indicator control
- Material Handling: Conveyor systems, palletizers, and AGV control with 24VDC load switching
- Process Control: Chemical, water treatment, and food/beverage plants for discrete actuation in distributed I/O setups
- Machine Control: Medium-to-large machinery requiring compact, high-current output integration
- Building Automation: HVAC, lighting, and access control with 24VDC devices
- OEM Equipment: Embedded in custom machines to minimize panel space and component count
- Installation & Maintenance:
- Mounting: Snap onto VersaMax carrier (IC200CHSxxx series); ensure proper backplane alignment for power/communication
- Wiring: Connect external field power (10.2–30VDC) to group DC+/- terminals; wire loads to individual output terminals; use shorting bars for bussed power connections
- Configuration: Use VersaPro or PAC Machine Edition to set output mapping and fault handling parameters
- Diagnostics: Check FLD PWR LED for field power; OK LED for backplane power/communication; output LEDs for on/off status; clear faults via software reset
- Protection: Use shielded cables grounded at the module; add external fuses for high-current loads; install surge suppressors for inductive loads
- Replacement: Hot-swappable (with carrier power off) to minimize downtime; confirm version compatibility for 12VDC operation (requires IC200MDL750B or later)
Reviews
There are no reviews yet.