ABB 1TGE120021R0010 MLink Communication Gateway (Hardware Version 2) for MNS iS MCC

Description

Technical Specifications

Core Communication & System Parameters

• System Compatibility: ABB MNS iS low-voltage motor control center (MCC)ABB
• Hardware Version: Version 2
• Internal Communication: Modbus RTU (for MNS iS internal bus)ABB
• Fieldbus Protocols: Modbus RTU/TCP, PROFINET IOABB
• Ethernet Interfaces: 2 × RJ45 Ethernet ports (10/100 Mbps), supporting network redundancy
• Serial Interfaces: RS485 (Modbus RTU), RS232 (optional)
• Data Transfer Rate: Up to 100 Mbps (Ethernet), up to 115.2 kbps (serial)
• Time Synchronization: Supports high-precision time synchronization (SNTP, PTP) for system-wide coordination
• Configuration: Via ABB MNavigate software or web-based interface, stored on non-volatile CF card

Physical & Mechanical

• Dimensions: 160 mm (Width) × 140 mm (Height) × 250 mm (Depth)ABB
• Net Weight: 2.0 kgABB
• Mounting: Installed in MNS iS control cable compartment, fixed with metal brackets, plug-and-play design
• Terminals: Screw terminals for power and serial communication; RJ45 for Ethernet
• Status Indicators: 8 × LED indicators for power, system status, communication activity, faults, and redundancy mode

Power & Environmental

• Supply Voltage: 24 VDC (18–30 VDC range)
• Power Consumption: Typical 15 W, maximum 25 W
• Operating Temperature: -10 °C to +60 °C
• Storage Temperature: -40 °C to +85 °C
• Humidity: 5%–95% RH, non-condensing
• Altitude: Up to 3000 m (derating applies above 1000 m)
• Protection Degree: IP20 (front face) when installed in MNS iS cabinets

Compliance & Reliability

• Certifications: CE, IEC 61439-2, UL 508, CSA C22.2 No. 14, RoHS compliantABB
• EMC Compliance: IEC/EN 61000-6-2 (industrial immunity), IEC/EN 61000-6-3 (industrial emissions)
• MTBF: High mean time between failures for continuous industrial operation
• Redundancy: Dual Ethernet ports support redundant network paths for maximum uptime

Key Features

Multi-Protocol Industrial Connectivity

• Unified Communication Hub: Integrates Modbus RTU/TCP and PROFINET IO, enabling seamless connection to diverse industrial control systemsABB.
• Protocol Conversion: Translates data between MNS iS internal Modbus RTU and external fieldbus protocols, eliminating compatibility barriers.
• High-Speed Data Exchange: Delivers real-time transmission of motor status, current, voltage, power, and fault data for precise monitoring and control.

Redundant & Resilient Networking

• Dual Ethernet Ports: Two independent Ethernet interfaces support redundant network configurations, ensuring communication continuity if one path fails.
• Automatic Failover: Seamless switchover between primary and secondary networks with no data loss or system disruption.
• Isolated Interfaces: Full galvanic isolation between communication ports and internal circuits protects against electrical noise and ground loops.

Centralized MCC Management

• Real-Time Monitoring: Provides continuous, centralized visibility into the status of all MControl units, motors, and feeders in the MCC.
• Remote Control: Enables remote start/stop, parameter adjustment, and reset of motor starters from the control room or SCADA system.
• Data Logging: Captures and stores operational data, fault logs, and event histories for performance analysis and predictive maintenance.

Robust Diagnostics & Maintenance

• Comprehensive LED Indicators: 8 status LEDs provide instant visual feedback on system health, communication status, and fault conditions.
• Built-In Self-Diagnostics: Performs continuous self-tests and alerts operators to communication errors, configuration issues, or hardware faults.
• Web-Based Interface: Offers a user-friendly web interface for configuration, monitoring, and troubleshooting without specialized software.
• Hot-Swappable Design: Allows for replacement or maintenance of the gateway module without shutting down the entire MCC system.

Seamless MNS iS Integration

• MNS iS Optimized: Designed exclusively for the ABB MNS iS platform, ensuring perfect mechanical and electrical compatibilityABB.
• Plug-and-Play Installation: Simple installation into the MNS iS control compartment with minimal wiring and configuration.
• Scalable Architecture: Supports expansion of the MCC system with additional MControl units and communication paths as needed.

Application Scenarios

Industrial Automation & Manufacturing

• Automotive Production: Connects MNS iS MCCs to PLCs and SCADA systems for centralized control of assembly line motors, conveyors, and robotic cells.
• Food & Beverage Processing: Enables remote monitoring and control of motors for mixers, pumps, and packaging equipment in hygienic production facilities.
• Packaging Machinery: Integrates with high-speed packaging lines for precise motor control and real-time performance monitoring.
• Electronics Manufacturing: Provides reliable communication for precision motor control in PCB assembly, semiconductor fabrication, and pick-and-place machines.

Process Industries

• Chemical & Petrochemical: Links MCCs to DCS systems for safe, centralized control of pumps, compressors, agitators, and fans in hazardous process areas.
• Pharmaceuticals: Supports GMP-compliant automation by connecting MCCs to plant control systems for mixers, centrifuges, and cleanroom equipment.
• Water & Wastewater Treatment: Enables remote monitoring and control of pumps, blowers, and aerators in water treatment plants and sewage facilities.
• Pulp & Paper: Integrates with process control systems for motor management in paper machines, drying sections, and material handling systems.

Power Generation & Distribution

• Thermal Power Plants: Connects auxiliary motor MCCs to plant DCS for control of boiler feed pumps, fans, and coal handling systems.
• Renewable Energy: Provides communication for motor control in wind turbine pitch systems, solar tracker drives, and biogas plant compressors.
• Industrial Power Distribution: Enables centralized management of motor control centers in large manufacturing facilities and data centers.

Heavy Industry & Infrastructure

• Mining: Integrates MCCs with mine automation systems for control of crushers, conveyors, and ventilation fans in underground and open-pit mines.
• Metallurgy: Connects to process control systems for motor management in steel mills, rolling mills, and aluminum smelters.
• Oil & Gas: Enables remote control of wellhead pumps, pipeline compressors, and refinery process motors from central control rooms.
• Ports & Logistics: Provides communication for motor control in container cranes, gantry cranes, and automated warehouse systems.

Building Automation & Commercial Infrastructure

• Commercial Buildings: Integrates with building management systems (BMS) for control of large HVAC fans, pumps, and ventilation systems.
• Airports & Railways: Connects MCCs to airport and railway control systems for baggage handling, escalators, and station equipment.
• Data Centers: Supports centralized monitoring and control of cooling system motors and backup power equipment.