Product Short Description
Product Introduction:
The IC200MDL740 is a 16-point discrete output module from GE Fanuc’s VersaMax series, engineered for industrial automation systems to switch 12/24VDC loads (solenoids, relays, indicators) with positive logic (sourcing) outputs. It delivers 0.5A per channel, 2.0A inrush for 100ms, and uses a single group of 16 outputs with shared DC+/- terminals. The module is backplane-powered (5VDC @ 45mA max), relies on external field power (10.2–30VDC), and features individual green LEDs for output status, plus FLD PWR and OK LEDs for power/communication confirmation. It integrates with all VersaMax CPUs/NIUs, converting PLC logic into load-driving signals for manufacturing, material handling, and process control applications.
Description
- Technical Specifications:
- Output Configuration: 16 sourcing outputs (1 group); positive logic
- Field Voltage: 10.2–30VDC (nominal 24VDC; 12VDC requires IC200MDL740B or later)
- Output Current: 0.5A continuous per point; 2.0A inrush (100ms max)
- Response Time: ON ≤0.2ms; OFF ≤1.0ms
- Leakage Current: ≤0.5mA at 30VDC
- Isolation: 1500V RMS (field-to-logic); no channel-to-channel isolation
- Backplane Power: 5VDC @ 45mA max
- Terminals: Screw terminals; shared DC+/- for 16 outputs; shorting bars for bussed connections
- Dimensions: 117mm × 80mm × 47mm (width × height × depth)
- Weight: 0.2kg (0.44 lbs)
- Environmental Ratings: Operating 0°C to +60°C; storage -40°C to +85°C; humidity 5%–95% (non-condensing)
- LED Indicators: 16 green (output on/off); FLD PWR (field power); OK (backplane power/communication)
- Protection: Electronic short-circuit/overcurrent protection; no internal fuses per channel
- Function Features:
- High-Density Sourcing Outputs: 16 points in one module reduce carrier space and wiring complexity
- Inrush Handling: 2.0A inrush capacity supports inductive loads (solenoids, relays)
- Real-Time Diagnostics: Individual output LEDs and FLD PWR/OK LEDs enable quick troubleshooting of power/signal issues
- Positive Logic Compatibility: Works with standard 24VDC industrial sensors and actuators
- Backplane Power: Simplified installation with no external logic power required
- Flexible Wiring: Shared DC+/- terminals with shorting bar support for bussed connections
- Fast Response: 0.2ms ON/1.0ms OFF times for high-speed control applications
- Application Scenarios:
- Manufacturing Automation: Automotive assembly, packaging lines, and electronics production for solenoid/indicator control
- Material Handling: Conveyor systems, palletizers, and AGV control with 24VDC load switching
- Process Control: Chemical, water treatment, and food/beverage plants for discrete actuation
- Machine Control: Small-to-medium machinery requiring compact, high-current output integration
- Building Automation: HVAC, lighting, and access control with 24VDC devices
- OEM Equipment: Embedded in custom machines to reduce panel space and component count
- Installation & Maintenance:
- Mounting: Snap onto VersaMax carrier; ensure proper backplane alignment for power/communication
- Wiring: Connect field power (10.2–30VDC) to DC+/-; outputs to respective channels; use shorting bars for bussed connections
- Configuration: Use VersaPro or PAC Machine Edition to set fault handling and output mapping
- Diagnostics: Check FLD PWR/OK LEDs for power; output LEDs for status; clear faults via software reset
- Protection: Use shielded cables for field wiring; ground shields at the module terminal block; add external fuses for high-current loads
- Replacement: Hot-swappable (with carrier power off) to minimize downtime; confirm version compatibility for 12VDC operation
Reviews
There are no reviews yet.