Product Short Description
Product Introduction: The IC200CPUE05 is the central CPU module for GE Fanuc’s VersaMax PLC system, serving as the system controller for up to 64 I/O modules and 2048 I/O points. It has 64 KB configurable memory (non‑volatile flash + battery‑backed RAM), a built‑in 10 Mbps Ethernet interface (RJ‑45, 10BaseT), 2 serial ports (RS‑232 9‑pin female, RS‑485 15‑pin female), a Run/Stop switch, and an Ethernet Restart pushbutton. It supports Ladder Diagram (LD) and Instruction List (IL) programming, SNP/RTU slave protocols, 8 SRTP server connections, 32 EGD exchanges, and NTP time sync. A supercapacitor provides 1‑hour backup, with a battery extending retention to 6 months. It uses a PWRx02 power supply and snaps onto 7.5 mm × 35 mm DIN rail.
Description
Technical Specifications
- CPU Type: VersaMax Series CPU module with embedded Ethernet.
- Memory: 64 KB configurable (application program, hardware config, registers, analog I/O); non‑volatile flash + battery‑backed RAM.
- I/O Capacity: 64 modules max; 2048 I/O points max.
- Execution Speed: Boolean: 0.8 ms/K typical; supports floating‑point (real) data functions.
- Ethernet Interface: 10 Mbps (half/full‑duplex auto‑sensing); RJ‑45 (UTP); 8 SRTP server connections; 32 EGD exchanges (100 data ranges/exchange, 1400 bytes/exchange); NTP time sync.
- Serial Ports: Port 1: RS‑232, 9‑pin female (Local Station Manager, SNP/RTU slave); Port 2: RS‑485, 15‑pin female (SNP/RTU slave, 5 V DC/100 mA max power for external devices).
- Power Requirements: 5 V DC: 220 mA; 3.3 V DC: 570 mA; requires PWRx02 supply.
- Data Retention: Supercapacitor: 1 hour; battery: up to 6 months.
- Programming Languages: Ladder Diagram (LD), Instruction List (IL).
- Protocols: SNP, RTU slave, SRTP, EGD, NTP.
- Dimensions: ~110.5 mm × 139.7 mm × 70 mm (4.35 in × 5.5 in × 2.75 in); weight ~0.4 kg.
- Mounting: 7.5 mm × 35 mm DIN rail (horizontal/vertical); clearance: top/bottom 5.1 cm, side 2.54 cm.
- Operating Environment: -40°C to +70°C; 5–95% RH (non‑condensing).
- Certifications: CE, UL, FCC; Class I, Div. 2, Groups A–D; Class 1 Zone 2.
Functional Characteristics
- Centralized Control: Serves as the system controller for up to 64 modules and 2048 I/O points.
- Dual Programming Support: Runs Ladder Diagram and Instruction List programs for flexible logic development.
- Multi‑Protocol Communication: Ethernet (SRTP, EGD, NTP) + serial (SNP, RTU slave) for seamless integration with HMI, SCADA, and other PLCs.
- Reliable Data Retention: Supercapacitor + battery backup ensures program/data integrity during power loss.
- Ease of Maintenance: Run/Stop switch for operational control; Ethernet Restart pushbutton for fast interface reset.
- Modular I/O Compatibility: Works with all VersaMax I/O modules for scalable system design.
- Tool‑Free Installation: Snaps onto DIN rail for quick deployment in control panels.
- EZ Program Store Compatibility: Supports EZ Program Store for program writing/reading/updating without a programmer.
Application Scenarios
- Industrial Automation: Controls up to 64 I/O modules in factories, connecting sensors/actuators to PLCs with Ethernet/serial integration.
- Process Control: Chemical/oil/gas/water treatment with 2048 I/O points for valves, pumps, analyzers; EGD for real‑time data sharing.
- Building Automation: HVAC/BMS with serial/Ethernet links for centralized monitoring/control of dampers, meters, and controllers.
- Machine Control: Machine tools and packaging lines using DIN‑rail mounting for quick I/O expansion and maintenance.
- Networked Systems: NTP time sync and 32 EGD exchanges enable coordinated multi‑PLC operations and data aggregation.
- Hazardous Locations: Certified for Class I, Div. 2, Groups A–D and Class 1 Zone 2 sites requiring reliable control in explosive atmospheres.
- Retrofit Projects: Upgrades legacy systems with Ethernet/serial connectivity while reusing existing VersaMax I/O modules.
Reviews
There are no reviews yet.