GE IC200BEM003 PROFIBUS‑DP Master Module

Description

Technical Specifications

• Network Type: PROFIBUS‑DP Master.
• Max Slaves: 125 PROFIBUS‑DP slaves.
• Data Capacity: With CPUx05: 3584 bytes input / 3584 bytes output; With PROFINET NIU: 1440 bytes input / 1440 bytes output; Per slave: 244 bytes input / 244 bytes output.
• Data Rate: 9.6 Kbps – 12 Mbps (auto‑detect or user‑configurable).
• Connector: 9‑pin D‑sub (female).
• Topology: Linear bus with termination at both ends; stubs allowed.
• Isolation: 250 VAC (frame‑ground); 1500 VAC (network‑backplane).
• Power Requirements: 450 mA max @ 5 VDC backplane; 5 mA max @ 3.3 VDC backplane.
• Operating Temperature: -40°C to +70°C.
• Humidity: 5–95% RH (non‑condensing).
• Dimensions: ~110 mm × 66.8 mm × 50 mm (4.3 in × 2.63 in × 1.96 in).
• Weight: ~0.18 kg (0.4 lbs).
• LED Indicators: “COM” (communication activity); “OK” (backplane power, no hardware faults); “NET” (network status).
• Software Compatibility: VersaPro Software 2.0+; VersaMax Ethernet NIU Firmware 1.10+; CPU Firmware 2.10+; WinLoader for firmware updates.

Functional Characteristics

• Master Control: Enables VersaMax CPU/PROFINET NIU to control up to 125 PROFIBUS‑DP slaves with high data throughput.
• Flexible Data Rates: Auto‑detect or manual configuration from 9.6 Kbps to 12 Mbps for diverse network needs.
• DP‑V1 Support: Handles read/write/alarm messages for advanced process communication.
• Sync/Freeze Modes: Coordinates slave I/O updates for time‑critical applications.
• Isolation Protection: 250 VAC frame‑ground and 1500 VAC network‑backplane isolation prevents noise/surge damage.
• Comprehensive Diagnostics: Slave status bits, diagnostic addresses, and module revision tracking with LED indicators for quick troubleshooting.
• Backplane Integration: Uses 5V/3.3V backplane power; no external power needed.
• Firmware Updates: Indirect updates via host controller using WinLoader utility.

Application Scenarios

• Distributed Process Control: Chemical plants, oil refineries, and water treatment facilities connecting PLCs to instruments, valves, and drives via PROFIBUS‑DP.
• Manufacturing Automation: Assembly lines and machine tools linking VersaMax CPU to 125+ slaves (sensors, actuators, VFDs) for synchronized control.
• Building Automation: HVAC/BMS with PROFIBUS‑DP devices (controllers, dampers, meters) for centralized monitoring/control.
• Energy Management: Power generation/distribution for generator control, transformer tap changers, and grid devices using DP‑V1 and Sync/Freeze modes.
• Remote SCADA: Unattended sites with VersaMax PLCs, leveraging isolation, diagnostics, and high data rates for reliable long‑term operation.
• Factory Integration: Connects legacy PROFIBUS‑DP devices to modern PROFINET networks via PROFINET NIU, preserving existing infrastructure.