GE F650BFBF2G0HIE

Description

Technical Specifications

• Manufacturer: GE Vernova (Multilin Product Line)
• Product Series: Multilin F650 Feeder Protection & Bay Controller
• Model Configuration (F650BFBF2G0HIE):
  • Display: Basic (B)+Enhanced (E) with front USB port
  • Rear Serial Comm Board 1: F (specific communication module)
  • I/O Board (Slot F): 2 (8 Digital Inputs + 8 Outputs + 2 Trip/Close Supervision Circuits)
  • I/O Board (Slot G): 1 (16 Digital Inputs + 8 Outputs)
  • Auxiliary Voltage: HI (110-250 Vdc, 88-300 Vdc range; 120-230 Vac, 96-250 Vac range)
• Protection & Control Core:
  • Processor: 32-bit RISC with control logic scan cycle ≤1ms
  • Fault Response Time: ≤1 cycle (60Hz) for overcurrent protection
• I/O Specifications:
  • Digital Inputs: 24 (16 from Slot G, 8 from Slot F)
  • Digital Outputs: 16 (8 from Slot G, 8 from Slot F)
  • Trip/Close Supervision Circuits: 2 (from Slot F)
  • Analog Inputs: Configurable via expansion modules; supports CT/VT inputs for current/voltage sensing
• Communication Protocols:
  • IEC 61850 Edition 2, IEC 60870-5-103/104, IEC 62439/PRP/HSR
  • Modbus RTU/TCP, DNP 3.0, IEEE 1588 (PTP), IRIG-B, SNTP
  • Ethernet: 10/100 Base TX, Redundant FX
• Metering Accuracy:
  • Current/Voltage: ±0.2% of full scale
  • Power: ±0.5% of full scale
  • Energy: ±0.5% of full scale
• Physical & Environmental:
  • Dimensions: 130mm × 135mm × 35mm (5.12×5.31×1.38 inches); Weight: 0.8 kg (1.76 lbs)
  • Mounting: Draw-out modular design for 19-inch racks
  • Operating Temperature: -40°C to +70°C (-40°F to +158°F)
  • Storage Temperature: -40°C to +85°C (-40°F to +185°F)
  • Environmental Rating: IP20 (indoor use); Conformal coating option for harsh environments
• Certifications: IEC 61850 Edition 2 compliant; UL, CE, ATEX certified

Functional Features

• Comprehensive Protection Functions: Time, instantaneous, and directional phase/neutral/ground/sensitive ground overcurrent protection; 2nd harmonic restraint; CT supervision; wattmetric ground fault detection; over/under voltage; over/under frequency; load encroachment supervision.
• High-Speed Fault Handling: Fault detection within ≤1 cycle (60Hz) enables rapid isolation, minimizing equipment damage and service disruption.
• Flexible Control Logic: Manual close with cold load pick-up control; forward/directional power units; load shedding and bus transfer schemes for system stability.
• Advanced HMI & Data Management: Enhanced display with front USB port; graphical LCD with single-line diagrams; event reports, waveform capture, and data logging for troubleshooting.
• Modular & Scalable Design: Draw-out construction allows quick replacement; configurable I/O modules adapt to varying system requirements.
• Global Communication Compatibility: Supports IEC 61850, Modbus, DNP 3.0, and IEC 60870-5-103/104 for seamless integration with SCADA and third-party devices.
• Precise Time Synchronization: IEEE 1588 (PTP), IRIG-B, and SNTP ensure accurate event timestamping for root-cause analysis.
• Embedded Automation Capabilities: Custom logic programming for arc flash detection, distributed generation interconnect protection, and load management.

Functional Advantages

• Integrated Protection & Control: Combines protection, control, and metering in one device, reducing system footprint and installation costs.
• Increased System Uptime: High-speed fault isolation and load transfer schemes minimize downtime and improve power supply reliability.
• Simplified Maintenance: Modular design and advanced diagnostics reduce troubleshooting time and replacement effort.
• Enhanced Data Visibility: Real-time metering, waveform capture, and event logs enable proactive maintenance and performance optimization.
• Seamless System Integration: Multi-protocol support ensures compatibility with legacy and modern power automation systems.
• Customizable Solutions: Flexible I/O and logic programming adapt to unique feeder and substation configurations.
• Cost Efficiency: Reduces hardware count and installation time, lowering total cost of ownership over the device lifecycle.

Application Scenarios

1. Utility Substations: Feeder protection, bus transfer, and arc flash detection in medium-voltage distribution networks, ensuring grid stability and reliable power delivery.
2. Industrial Power Systems: Protection of feeders supplying motors, transformers, and switchgear in manufacturing plants, refineries, and chemical facilities.
3. Commercial & Institutional Buildings: Power distribution control in data centers, hospitals, and large commercial complexes, safeguarding critical loads against faults.
4. Renewable Energy Integration: Distributed generation interconnect protection for solar, wind, and other renewable energy sources, ensuring grid compatibility and safety.
5. Transmission & Distribution Automation: Load shedding and fault location for improved system efficiency and reduced outage duration.
6. Critical Infrastructure: Protection of feeders in water treatment plants, wastewater facilities, and transportation systems, maintaining continuous operation of essential services.