Product Type: Eddy – current proximity transducer (preamplifier for vibration monitoring)
Measurement Performance: The system can achieve a measurement range of ±10mm based on the matching probe type and configuration; the shaft vibration sensing range reaches 0 – 25mm.
Sensitivity: Maintains a precision sensitivity of 7.87V/mm (200mV/mil) to capture tiny changes in mechanical movement.
Power Supply: Operates with a nominal 24V DC power supply, and the acceptable voltage range is 20 – 30V DC.
Output Signal: Supports 4 – 20mA linear output which is proportional to displacement, and also has a 0 – 5V voltage output mode for connection with various monitoring equipment.
Frequency Response: Covers a frequency range of 10Hz to 10kHz, which fully meets the monitoring needs of mainstream industrial rotating machinery.
Temperature Tolerance: The sensor itself works within the range of – 40°C to 85°C, while the matching probe can withstand temperatures from – 40°C to 120°C, and the overall system can operate normally even at temperatures up to 150°C in specific configurations.
Physical Attributes: The housing and probe are made of stainless steel. The product weighs 820g, and the standard cable length is 5 meters, with an optional 9 – meter cable. The overall dimensions are 15.2cm × 10.2cm × 2.5cm.
Installation Method: Adopts a guide rail mounting design, and standard mounting hardware is provided for installation.
Environmental Rating: Boasts an IP67 protection level, achieving dust – tight and waterproof performance to adapt to harsh working conditions.
Compatibility: Fully interchangeable with probe and extension cable components of the non – XL 3300 series, and no bench calibration is required during component replacement.
Product Type: Eddy – current proximity transducer (preamplifier for vibration monitoring)
Measurement Performance: The system can achieve a measurement range of ±10mm based on the matching probe type and configuration; the shaft vibration sensing range reaches 0 – 25mm.
Sensitivity: Maintains a precision sensitivity of 7.87V/mm (200mV/mil) to capture tiny changes in mechanical movement.
Power Supply: Operates with a nominal 24V DC power supply, and the acceptable voltage range is 20 – 30V DC.
Output Signal: Supports 4 – 20mA linear output which is proportional to displacement, and also has a 0 – 5V voltage output mode for connection with various monitoring equipment.
Frequency Response: Covers a frequency range of 10Hz to 10kHz, which fully meets the monitoring needs of mainstream industrial rotating machinery.
Temperature Tolerance: The sensor itself works within the range of – 40°C to 85°C, while the matching probe can withstand temperatures from – 40°C to 120°C, and the overall system can operate normally even at temperatures up to 150°C in specific configurations.
Physical Attributes: The housing and probe are made of stainless steel. The product weighs 820g, and the standard cable length is 5 meters, with an optional 9 – meter cable. The overall dimensions are 15.2cm × 10.2cm × 2.5cm.
Installation Method: Adopts a guide rail mounting design, and standard mounting hardware is provided for installation.
Environmental Rating: Boasts an IP67 protection level, achieving dust – tight and waterproof performance to adapt to harsh working conditions.
Compatibility: Fully interchangeable with probe and extension cable components of the non – XL 3300 series, and no bench calibration is required during component replacement.
Reviews
There are no reviews yet.
Be the first to review “Bently Nevada 330180-91-00 3300 XL 8mm Proximitor Sensor” Cancel reply
Reviews
There are no reviews yet.