System Configuration: 5.0-meter (16.4 feet) system length, optimized for medium-distance installation and wiring requirements
Probe Compatibility: Accepts inputs from 3300 series 5mm, 3300 8mm, and 3300 XL 8mm non-contacting proximity probes and extension cables
Sensitivity: Maintains a precise sensitivity of 7.87 mV/μm (200 mV/mil) for accurate signal conversion
Frequency Response: Covers a frequency range of 0–10kHz with a typical tolerance of +0/-3dB, encompassing mainstream industrial machinery vibration bands
Linear Range: Starts at approximately 0.25mm from the target surface and extends to 2.3mm, with a standard gap setting of 1.27mm and corresponding output voltage range of -1Vdc to -17Vdc
Power Supply Requirements: Operates at -17.5Vdc to -26Vdc without a safety barrier and -23Vdc to -26Vdc with a safety barrier, with a maximum operating current of 12mA
Temperature Tolerance: Operating temperature ranges from -51°C to 100°C; storage temperature ranges from -51°C to 105°C, compatible with probes and cables that withstand broader temperature extremes
Physical Attributes: Constructed from A308 aluminum, weighs 0.7kg (shipping weight 2kg), with compact dimensions for flexible installation
Mounting Type: DIN rail mounting mechanism with electrically insulated substrate, eliminating the need for additional insulation plates
Certifications: Country-specific approvals (CN-specific) with optional certificate of origin available upon request
High-Precision Signal Conversion: Delivers linear output characteristics, high repeatability, and low signal drift during long-term operation. It accurately translates subtle mechanical displacement and vibration into stable electrical signals, enhancing measurement accuracy and signal-to-noise ratio.
Strong Anti-Interference Capability: Adopts advanced RFI/EMI protection technology that meets European electromagnetic compatibility standards. It maintains stable performance even in complex electromagnetic environments, free from interference from industrial equipment like motors and frequency converters.
Dual Installation Flexibility: Supports both compact DIN rail mounting and traditional panel mounting. The insulated mounting base aligns with universal industrial standards, simplifying standardized assembly and adapting to different control cabinet layouts.
Comprehensive Protection Mechanisms: Equipped with output short-circuit protection and reverse wiring protection. These features prevent component damage caused by misoperation or circuit faults during installation and use, ensuring operational safety.
Seamless System Compatibility: Achieves full interchangeability with matching series probes and extension cables, requiring no bench calibration during assembly or replacement. It integrates seamlessly with various monitoring systems and upper-computer software for real-time data transmission.
Country-Specific Compliance: Features region-tailored approvals that align with local industrial application norms, ensuring legal compliance and reliable performance in targeted markets.
Application Scenarios
Power Industry: Used for condition monitoring of steam turbines, generators, and hydropower units in thermal and hydropower plants. It monitors shaft vibration, axial displacement, and other key parameters, providing early fault warnings to safeguard critical power generation equipment.
Petrochemical Industry: Installed on centrifugal compressors, gearboxes, and pumps in refineries and chemical plants. It tracks real-time vibration and position changes of rotating components, preventing production accidents caused by equipment failures in processes involving flammable and corrosive media.
Metallurgical Industry: Deployed on blast furnace fans, rolling mill gearboxes, and other rotating machinery in steel plants. It withstands harsh conditions of large temperature fluctuations and heavy dust, ensuring continuous monitoring and stable operation of metallurgical production lines.
General Manufacturing: Applied to water pumps, fans, motors, and other rotating equipment in manufacturing workshops. It enables maintenance teams to perform predictive maintenance, reducing unplanned downtime and improving overall production line efficiency.
Critical Industrial Machinery: Suitable for various high-value rotating machinery requiring precise condition monitoring, including turbines, compressors, and heavy-duty motors. It supports data-driven maintenance strategies, extending equipment service life and lowering operational costs.
Reviews
There are no reviews yet.
Be the first to review “Bently Nevada 330180-51-CN 3300 XL Proximitor Sensor” Cancel reply
Reviews
There are no reviews yet.