System Matching: Compatible with 3300 XL series 8mm, 11mm, 25mm and 50mm sensor systems, with a fixed system length of 5.0 meters
Sensitivity: Maintains a precision of 7.87 mV/μm (200 mV/mil) for accurate signal conversion
Frequency Response: Features a frequency response range of 0 – 10kHz with a typical tolerance of +0/-3dB, covering mainstream machinery vibration frequency bands
Linear Range: Starts at approximately 0.25mm from the target surface and extends to 2.3mm, with a standard gap setting of 1.27mm and a corresponding output voltage range of -1Vdc to -17Vdc
Power Supply Requirements: Operates with -17.5Vdc to -26Vdc without a safety barrier and -23Vdc to -26Vdc with a safety barrier, with a maximum operating current of 12mA
Temperature Tolerance: Works stably between -35℃ and 85℃; the storage temperature ranges from -35℃ to 100℃. It matches probes that can withstand -51℃ to 177℃ and special cables that can resist up to 260℃
Physical Dimensions: Measures 8.13 cm × 6.12 cm × 6.35 cm and weighs 0.5 kg, facilitating flexible installation layout
Mounting Type: Adopts DIN rail mounting design, and the integrated mounting base has electrical insulation properties
Output Characteristics: Provides selectable voltage or current output signals, equipped with output short-circuit protection and reverse wiring protection functions
Strong Electromagnetic Interference Resistance: Adopts advanced RFI/EMI protection technology and meets European electromagnetic compatibility standards. It can maintain stable signal transmission even when installed in fiberglass enclosures without additional shielding components
Dual Installation Adaptability: While designed for DIN rail mounting, it also supports traditional panel mounting. Its insulated mounting base eliminates the need for separate insulation plates, adapting to different control cabinet layouts
Comprehensive Safety Protection: Equipped with multiple protection mechanisms including output short-circuit protection and reverse wiring protection. These functions prevent component damage caused by misoperation or circuit failures during installation and use
Convenient Maintenance Support: Has self-test capability and gap voltage monitoring function. These functions allow maintenance personnel to quickly verify the working status of the sensor and ensure the accuracy of measurement data without disassembling the entire system
Broad System Compatibility: Achieves seamless communication with Modbus clients such as monitoring and data acquisition systems through Modbus gateway. It can also be backward compatible with non-3300 XL series transducer components, reducing the cost of system upgrades and replacements
Stable Long-Term Operation: Uses high-quality components and a rugged structural design. It can maintain consistent performance during long-term operation in harsh industrial environments, and its non-volatile memory can permanently store configuration information without data loss due to power outages
Application Scenarios
Steam and Gas Turbines: Deployed in thermal power plants and petrochemical gas turbine units, it monitors radial vibration and shaft displacement of turbine rotors. It adapts to the high-temperature and high-pressure operating environment of turbines and ensures timely detection of abnormal shaft movements
Industrial Compressors: Applied to natural gas and chemical compressors in refineries and chemical plants. It tracks vibration parameters of fluid-film bearing components in compressors, preventing equipment damage caused by bearing wear or misalignment
Centrifugal Pumps and Fans: Installed on key pumps in water treatment plants and fans in steel mills. It monitors the operating status of rotating shafts, avoiding production interruptions caused by pump jams or fan imbalance
Large Motors: Used in high-power industrial motors in manufacturing workshops and power stations. It monitors motor rotor eccentricity and bearing vibration, helping to identify potential faults such as motor misalignment at an early stage
Turbine Supervision Systems: Integrated into professional turbine supervision instruments, it provides continuous and stable position and vibration data. It forms a complete protection system with other monitoring modules to avoid catastrophic failures of key turbine equipment
Key Industrial Machinery: Suitable for various critical rotating machinery such as gearboxes in mining equipment and blowers in cement plants. It supports predictive maintenance of equipment by providing real-time data, reducing unplanned downtime in industrial production lines
Reviews
There are no reviews yet.
Be the first to review “Bently Nevada 330180-51-00 3300 XL Proximitor Sensor” Cancel reply
Reviews
There are no reviews yet.