Bently 330104-00-22-10-02-05 Eddy Current Sensor Probe

Description

Functional Characteristics:

• Non-Contact Measurement: Eliminates mechanical wear, ensuring long-term stability.
• High Precision: ±0.05 mm gap calibration accuracy.
• Robust Design: Stainless steel housing and armored cable protect against harsh environments.
• Wide Temperature Range: Operates reliably in extreme conditions, from cryogenic to high-temperature settings.
• EMI Shielding: Built-in electromagnetic interference shielding for stable signals.
• Long-Distance Transmission: Supports up to 305 m (1000 ft) signal transmission with minimal degradation.
• Interchangeability: Probe, extension cable, and前置器 are interchangeable, reducing maintenance costs.

Application Scenarios:

• Power Generation: Monitors vibration, displacement, and speed in turbines, generators, and pumps to ensure safe operation.
• Petrochemical Industry: Detects vibration and displacement in compressors, reactors, and centrifuges to prevent failures.
• Metallurgical Industry: Measures axial vibration and displacement in blast furnaces, converters, and continuous casting machines.
• Aerospace: Monitors vibration in aircraft engines and spacecraft for flight safety.
• Marine Engineering: Detects vibration in ship propulsion systems to ensure stable navigation.
• Scientific Research: Provides high-precision vibration and displacement data for rotor dynamics studies and mechanical structure analysis.

System Integration Requirements:

• Target Surface: Minimum diameter ≥50 mm, made of conductive metal (carbon steel/stainless steel preferred).
• Installation Clearance: Probe gap calibration error ≤±0.05 mm; distance between前置器 and probe ≤5 m (recommended shielded cable).
• Signal Processing: Converts coil impedance changes into voltage signals via前置器 for output (4-20mA/0-10V).

Compatibility:

• Works seamlessly with Bently 3300 XL 8mm extension cables and前置器.
• Supports integration with Bently 3500 vibration monitoring modules, 2300/20 dual-channel monitors, and 1900/65A vibration monitors.

Certifications and Standards:

• Complies with API 670 standards for vibration monitoring in rotating machinery.
• Meets European electromagnetic compatibility (EMC) standards for RFI/EMI resistance.

Maintenance and Calibration:

• Calibration: Recommend using TK-3E校验仪 every 12 months to ensure measurement error ≤±2%.
• Cleaning: Use isopropyl alcohol to clean the probe tip regularly to avoid metal debris accumulation.
• Signal Inspection: Check前置器 OK指示灯 for module status; TX/RX指示灯 abnormalities may indicate communication issues.

Troubleshooting:

• Signal Drift: Clean the probe tip with isopropyl alcohol if metal debris is attached.
• Communication Failure: Verify shielding cable integrity; the 3300XL series supports up to 305 m transmission distance (add a repeater for longer distances).
• High-Temperature Operation: Prefer the 330104-00-22-10-02-05 armored model (operating temperature up to 177°C).
• Explosion-Proof Needs: Optional ATEX Zone 2 certification version (requires combination with 330180-90 series).