Product Short Description
Technical Specifications:
- Sensor Type: Eddy current proximity probe with non-contact measurement capability.
- Measurement Range:
- Radial Vibration: 0.5 mm to 10 mm peak-to-peak (depending on probe tip diameter).
- Axial Position: ±2 mm to ±5 mm (configurable based on system setup).
- Shaft Displacement: Measures static and dynamic displacement with sub-micron resolution.
- Frequency Response: 0 Hz to 10 kHz (flat response up to 1 kHz, -3 dB at 10 kHz).
- Linearity: ±1% of full-scale reading across the operating range.
- Temperature Range:
- Sensor Operating: -50°C to 200°C (-58°F to 392°F).
- Cable Operating: -40°C to 85°C (-40°F to 185°F).
- Probe Tip Diameter: 5 mm (standard) or 8 mm (optional for extended range).
- Cable Length: 5 meters (standard) or 9 meters (optional), with optional junction box for extended runs.
- Output Signal: 0 V to -18 VDC (negative voltage proportional to gap distance).
- Compatibility: Works with Bently Nevada 3300 series monitoring systems and System 1 software.
- Material:
- Probe Housing: Stainless steel 316L for corrosion resistance.
- Cable Jacket: Polyurethane or Teflon® for chemical and abrasion resistance.
- Certifications: Complies with ATEX, IECEx, and CE standards for use in hazardous areas (Zone 0, 1, 2).
Description
Functional Features:
- High-Resolution Measurement: Detects sub-micron displacements for precise monitoring of shaft behavior.
- Non-Contact Design: Eliminates wear and tear associated with contact-based sensors, ensuring long-term reliability.
- Dynamic and Static Measurement: Captures both transient vibrations and steady-state shaft positions.
- Temperature Compensation: Automatically adjusts for temperature-induced errors to maintain accuracy.
- Self-Diagnostic Capabilities:
- Continuous monitoring of sensor health, cable integrity, and system status.
- Built-in test (BIT) function for rapid fault detection.
- Easy Installation: Modular design with pre-terminated cables and quick-connect fittings.
- Environmental Sealing: IP67-rated probe and cable connections for protection against dust and moisture.
Application Scenarios:
- Power Generation: Monitors turbine shaft vibrations and generator rotor positions to prevent overheating and mechanical failures.
- Oil & Gas: Tracks compressor and pump shaft displacements for early detection of misalignment, imbalance, or bearing degradation.
- Chemical Processing: Ensures safe operation of reactors, centrifuges, and agitators by monitoring critical vibration thresholds.
- Aerospace: Supports testing and monitoring of aircraft engine components, including rotor dynamics and blade tip clearance.
- Marine Propulsion: Safeguards ship engines by monitoring main bearing vibrations and crankshaft deflections.
- Water Treatment: Monitors pump and motor vibrations in wastewater treatment plants to prevent clogging and seal failures.
- Renewable Energy: Detects abnormal vibrations in wind turbine gearboxes and generators for predictive maintenance.
- Steel Manufacturing: Monitors rolling mill shafts and blast furnace components for excessive wear or thermal expansion.
Key Advantages:
- High Reliability: Meets stringent industrial standards for safety-critical applications, ensuring consistent performance in extreme environments.
- Cost-Effective: Reduces maintenance costs through early fault detection and predictive maintenance strategies.
- Seamless Integration: Compatible with Bently Nevada’s 3300 series monitoring systems and System 1 software for centralized data analysis.
- Flexible Configuration: Supports customizable measurement ranges, probe tip diameters, and cable lengths to suit diverse application needs.
- Global Support: Backed by Bently Nevada’s worldwide service network for rapid technical assistance and spare parts availability.
- Environmental Adaptability: Designed to operate reliably in high humidity, corrosive atmospheres, and wide temperature ranges.
Reviews
There are no reviews yet.