Product Short Description
Technical Specifications:
- Dimensions: 241.3 mm (H) × 24.4 mm (W) × 99.1 mm (D)
- Weight: 0.20 kg (0.44 lbs)
- Channels: 4-channel monitoring for proximity and seismic inputs
- Signal Processing:
- Radial vibration: Programmable direct filter (single-pole, -3 dB, 4 Hz–4000 Hz or 1 Hz–600 Hz, 1% accuracy).
- Gap filter: 0.09 Hz, -3 dB.
- Non-1X filter: Constant Q-notch filter with ≥34.9 dB suppression in the stopband (60 cpm to 15.8× operating speed).
- 1X/2X vector filters: Constant Q-value filters with ≥57.7 dB rejection in the stopband.
- Accuracy:
- Gap and direct measurements: Within 0.33% of full scale.
- 1X/2X measurements: Within 0.33% of the normal maximum value or 1% of full scale.
- Differential expansion and thrust: Within 0.33% of full scale.
Description
- Operating Temperature: 0°C to 85°C (32°F to 185°F)
- Environmental Resistance: IP67-rated for dust and water resistance
- Power Consumption: 5.6 W
- Compliance: Meets API 670 (machinery protection systems) and API 618 (reciprocating compressors). Certified for safety integrity level (SIL) 3 applications.
Functional Features:
- Multi-Sensor Support: Accepts inputs from proximity probes (for shaft vibration and position) and seismic sensors (for acceleration/velocity measurements).
- Programmable Alarms: User-configurable alarm thresholds for vibration, position, and differential expansion to trigger alerts during abnormal conditions.
- Real-Time Monitoring: Continuously compares measured parameters against preset alarm settings to provide immediate mechanical protection.
- Data Integration: Seamlessly interfaces with the 3500 system rack and System 1 software for centralized monitoring and analysis.
- Diagnostic LEDs:
- OK LED: Indicates normal operation.
- TX/RX LED: Shows communication status with other modules.
- Bypass LED: Signals bypass mode activation.
Application Scenarios:
- Power Generation: Monitors turbines, generators, and pumps to detect rotor imbalance, bearing wear, or electrical transients.
- Oil & Gas: Tracks compressor and pump vibrations during load changes to prevent valve malfunctions or piston impacts.
- Petrochemical Industry: Analyzes reactor vessel vibrations during feedstock changes to avoid resonance-induced damage.
- Manufacturing: Ensures quality control in rotating equipment (e.g., motors, spindles) by detecting misalignment or imbalance.
- Marine & Offshore: Protects propulsion systems on ships and offshore platforms by monitoring shaft vibrations and thrust positions.
Key Advantages:
- High Precision: Sub-1% measurement accuracy ensures reliable fault detection.
- Rugged Design: Withstands harsh environments, including extreme temperatures, humidity, and electromagnetic interference.
- Scalability: Integrates into the 3500 series rack, supporting up to 14 monitor modules per system.
- Cost Efficiency: Reduces downtime and maintenance costs through predictive maintenance enabled by continuous data streaming.
Reviews
There are no reviews yet.