FOXBORO 873EC-JIPFGZ-5

Description

• Flow range: 0.01–1000 m³/h (dependent on line size)
• Accuracy: ±0.2 % of full scale
• Fluid temp: -20 to +150 °C
• Pressure: up to 1.6 MPa standard (higher on request)
• Liner: PTFE or PFA
• Electrodes: Hastelloy C-276
• Output: 4–20 mA + HART 7
• Supply: 24 VDC ±10 %, < 8 W
• Ambient: -40 to +70 °C
• Enclosure: IP67, optional Ex d IIB T4 / Ex ia IIIC T4
• Sizes: DN15–DN600 flanged
  Functional Features: Empty-pipe detection, self-diagnostics, temperature compensation, reversible flow measurement, bidirectional totalization, EMI/RFI shielded electronics.
  Working Principle: An energized coil induces a magnetic field across the pipe; conducting fluid cutting the field generates a voltage proportional to velocity, which the transmitter linearizes into flow rate.
  Application Scenarios: Acid/alkali dosing in petrochemical plants, slurry and wastewater flow, food-grade liquid batching with PTFE liner, utility water metering.
  Structural Characteristics: Separate or integral amplifier head, PTFE-lined carbon-steel or stainless body, dual Hastelloy electrodes, flanged process connection, rotary LCD head.
  Installation Requirements: Full pipe condition mandatory; electrode plane vertical for non-conductive solids; ground ring or lining-ground electrode required; straight run 5D upstream / 3D downstream; avoid strong AC fields.
  Usage Notes: Fluid conductivity must exceed ~5 µS/cm; degas lines before zeroing; do not power 24 VDC from shared noisy supply; recalibrate after liner replacement.