Product Short Description
Product Name: JUMO iTRON DR 100 Microprocessor-Based Controller
Product Description: The model 702060288-888-000-23 is a JUMO iTRON DR 100 universal, freely configurable microprocessor regulator. The code “288” indicates programmable/configurable inputs, “888” denotes programmable input configuration per user requirements, making it suitable for a wide range of control and regulation tasks. It features a two-line LCD display and 35 mm DIN rail mounting.
Description
Technical Specifications:
-
Basic Type: 702060 JUMO iTRON DR 100
-
Display: Two-line LCD
-
Mounting: 35 mm DIN rail
-
Product Width: 22.5 mm
-
Output 1: Relay (changeover contact) — selectable NC/NO
-
Output 2: Relay (NO contact) — selectable
-
Output 3: Logic output: 0 / 5 V / 20 mA (programmable)
-
Input: Programmable — RTD, thermocouple, potentiometer, resistance transmitter, or standard voltage/current signals
-
Universal measuring sensor linearization stored in the instrument
-
Power Supply: AC 110–240 V +10% / -15%, 48–63 Hz (AC/DC 20–53 V option available)
-
Electrical Connection: Plug-in screw terminals, max. conductor cross-section 2.5 mm²
Functional Features: Can be used as a two-state or three-state controller with a limit comparator; free-set slope ramp function and timer function provided as standard; automatic self-tuning via front panel keys for optimized control parameters; dynamic parameter change auto-acceptance after 2 seconds of inactivity; Setup configuration software available as accessory.
Application Scenarios: Regulating temperature, pressure, and other process parameters in industrial automation, laboratory, and machinery applications.
Installation Requirements: Mount on standard 35 mm DIN rail; wire the plug-in screw terminals with conductors up to 2.5 mm²; ensure supply voltage matches the configured power option.
Precautions: Observe correct polarity and voltage rating; use appropriate fusing on the supply circuit; avoid exposing the device to moisture beyond the rated non-condensing humidity range; configuration changes should be performed by qualified personnel.
Reviews
There are no reviews yet.