Product Short Description
Product Name: SECO B161S-E176, Industrial Embedded Computing Platform / Programmable Control System
Product Introduction: The SECO B161S-E176 is a high-performance industrial embedded computing platform built around an Intel Atom processor. It serves as an edge computing node, HMI platform, or programmable control system for industrial automation applications. (Note: This model may also appear in variant configurations as a digital output module or DC drive in certain distributor catalogs, but the core B161S-E176 platform is an x86-based embedded controller.)
Description
Technical Specifications (Embedded Controller Configuration):
-
Processor: Intel Atom x7-E3950 (quad-core, 1.8 GHz) — alternatively E3800 series per some configurations
-
Memory: Maximum 16 GB DDR4 SDRAM (or up to 8 GB DDR3L per variant)
-
Storage: 64 GB eMMC or 2.5-inch SATA III HDD/SSD
-
Display Interfaces: 2 × HDMI, 1 × eDP/LVDS (supports up to 1080p resolution)
-
Network Interfaces: 2 × Gigabit Ethernet, 2 × RS-232/422/485
-
Expansion Slots: M.2 Key E, M.2 Key B, Mini PCIe
-
Power Input: 9–32 V DC (wide voltage)
-
Operating Temperature: -20 °C to 60 °C
-
Protection Rating: IP20 (indoor dust protection)
-
Dimensions: Compact form factor for DIN rail or panel mount
Alternative Configuration (Digital Output Module variant):
-
16-channel digital output, 24 VDC or 24 VAC, 2 A per channel
-
Dimensions: 50.8 × 88.9 × 8.8 mm, Weight: 100 g
Functional Features:
-
Multi-interface compatibility: HDMI, eDP/LVDS, Gigabit Ethernet, RS-232/422/485
-
Modular expansion: M.2 and Mini PCIe slots for Wi-Fi, Bluetooth, 5G, or industrial communication cards
-
Supports industrial communication protocols (Modbus, EtherNet/IP)
-
Fanless design for reliability
-
Anti-vibration, dust-resistant construction
-
Wide voltage input for industrial power environments
Application Scenarios:
-
Industrial Automation: Edge computing node for PLC or SCADA systems, processing sensor data and executing control instructions
-
Smart Transportation: Vehicle navigation, traffic signal control systems
-
Medical Equipment: Driver for imaging diagnostic equipment (e.g., CT machines)
-
Intelligent Buildings: Building automation and control
Installation Requirements: Mount in control cabinet or on DIN rail. Provide 9–32 V DC power. For digital output variant, connect 24 VDC/AC field devices to output terminals. Ensure adequate ventilation for fanless operation within -20 °C to 60 °C range.
Usage Precautions: Given the model appears in multiple product categories (embedded PC, digital I/O module, DC drive), verify exact configuration with SECO or the supplying distributor. IP20 rating requires indoor installation away from direct moisture. Wide temperature operation (-20 °C to 60 °C) suits most industrial environments but avoid placement near high-heat sources.
Reviews
There are no reviews yet.