Product Short Description
Product Name: ProSoft 5204‑DFNT‑PDPMV1 EtherNet/IP to Profibus‑DP Master Gateway
Product Introduction: An Ethernet gateway that bridges EtherNet/IP (DFNT) networks to Profibus‑DP networks, functioning as a Profibus‑DP Master. Part of ProSoft Technology’s connectivity portfolio (alongside MVI56‑PDPMV1 and other PDPMV1 family modules).
Description
Technical Specifications:
-
Primary Protocol: EtherNet/IP (DFNT) – Master side
-
Secondary Protocol: Profibus‑DP – Master side
-
Power: 24 VDC nominal (18‑32 VDC allowed)
-
Current Load: Max 500 mA @ 32 VDC
-
Operating Temperature: ‑4 °F to 122 °F (‑20 °C to 50 °C)
-
Storage Temperature: ‑40 °F to 185 °F (‑40 °C to 85 °C)
-
Relative Humidity: 5 % to 95 % (non‑condensing)
-
Dimensions:
-
Standard: 5.20 in (H) × 2.07 in (W) × 4.52 in (D) (13.2 cm × 5.25 cm × 11.48 cm)
-
Extended: 5.20 in (H) × 2.73 in (W) × 4.52 in (D) (13.2 cm × 6.934 cm × 11.48 cm)
-
-
LED Indicators: Power/Module status, Application status, Serial activity, Serial error
Functional Features:
-
Acts as Profibus‑DP Master on the fieldbus side
-
EtherNet/IP connectivity to upstream control systems
-
DIN‑rail mountable standalone gateway architecture
Application Scenarios: Integrating Profibus‑DP slave devices into EtherNet/IP control architectures; connecting legacy Profibus equipment to modern Ethernet/IP PLCs.
Installation Requirements: Mount on a 35 mm DIN rail; wire 24 VDC power to the designated terminals; connect the Profibus‑DP network to the appropriate port with proper bus termination.
Usage Notes: Configuration is performed via ProSoft configuration utilities; ensure the supplied voltage stays within 18‑32 VDC to avoid module damage.
Reviews
There are no reviews yet.