GE 97590-8

Description

• Provides high-speed networking between PLCs, I/O stations, HMIs, and supervisory systems.
• Enables complex industrial network topologies with redundancy support.
• Designed for automation systems requiring high data throughput and reliable communication.

• Manufacturer:​ General Electric Intelligent Platforms
• Model:​ 97590-8
• Product Code:​ BD-PCI4PORT
• Compatible Controller:​ GE PACSystems RX7i
• Bus Interface:​ PCI interface for RX7i controller slot
• Ethernet Ports:​ 4 × 10/100/1000Base-T RJ45
• Maximum Port Speed:​ 1 Gbps per port
• Protocols:​ EtherNet/IP, PROFINET, Modbus TCP, TCP/IP, UDP reported
• Redundancy:​ Device Level Ring and MRP-type industrial redundancy supported in listings
• Transmission Feature:​ DMA support and low-latency communication reported
• Power Supply:​ From controller backplane
• Power Consumption:​ Approximately 10 W reported
• Dimensions:​ Approximately 178 × 127 mm reported
• Weight:​ Approximately 0.68 kg reported
• Operating Temperature:​ Around 0°C to 55°C in related listings

• Four independent Gigabit Ethernet ports for segmented networking.
• Supports industrial protocols used in discrete and process automation.
• Enables controller communication with remote I/O and SCADA systems.
• Redundant ring topologies for improved network availability.
• Diagnostic and link indicators for network troubleshooting.
• High-speed data transfer for large automation systems.

• Factory automation networks
• Power generation control systems
• Water and wastewater plants
• Food and beverage production
• Oil and gas automation
• SCADA communication backbones
• High-speed PLC-to-I/O communication

• Industrial PCI card format with RJ45 front connectors.
• Metal bracket for secure controller slot installation.
• Designed for installation inside RX7i controller chassis.
• Printed circuit assembly with industrial Ethernet transceivers.

• Inserts into the PCI expansion slot of the RX7i controller.
• Creates four independent Ethernet network interfaces.
• Transfers data between the controller processor and external devices.
• Routes industrial Ethernet frames according to configured protocols.
• Supports redundant paths to maintain communication during network faults.

• Install only in compatible GE RX7i controller slots.
• Power down the controller before module installation where required.
• Use CAT5e or better Ethernet cabling for Gigabit performance.
• Plan network addressing and VLAN topology before commissioning.
• Configure supported protocols through GE automation software.
• Verify grounding and cabinet environment before operation.

• Do not force the module into incompatible slots.
• Avoid bending or stressing Ethernet connectors.
• Protect network ports from electrostatic discharge.
• Monitor link status LEDs for port faults.
• Update firmware and configuration records when changes are made.
• Maintain spare inventory for critical redundant systems.