Product Short Description
Product Introduction:
This is a 2‑module‑width, wall‑mounting ACOPOSmulti inverter module delivering 44 A continuous current to a single servo axis. It integrates “Uncontrolled Stops” and “Safe Stop” safety functions, providing a built‑in connection for the motor, holding brake, and temperature sensor, plus two slots for ACOPOSmulti plug‑in modules.
Description
Technical Specifications:
|
Parameter
|
Value
|
|---|---|
|
Continuous output current
|
44 A
|
|
Power rating
|
Approx. 32 kW class (depending on voltage)
|
|
Module width
|
2 (B&R unit)
|
|
Dimensions (W × H × D)
|
106.5 mm × 317 mm × 263 mm
|
|
Weight
|
Approx. 5.4 kg
|
|
Protection rating
|
IP20 per EN 60529
|
|
Degree of pollution
|
2 (non‑conductive) per EN 61800‑5‑1
|
|
Overvoltage category
|
III per EN 61800‑5‑1
|
|
Trigger inputs
|
2, electrically isolated
|
|
Trigger input voltage
|
24 VDC (nom) / 30 VDC (max)
|
|
Trigger switching threshold
|
Low 15 V
|
|
Trigger delay
|
Rising edge 52 µs ±0.5 µs; Falling edge 53 µs ±0.5 µs (digitally filtered)
|
|
Temperature sensor connection
|
1 (500 Ω to 5 kΩ range)
|
|
Energy efficiency (IE classification)
|
IE2 (losses 1 % to 1.9 % depending on load)
|
|
Standby losses
|
10.3 W
|
|
Discharge capacitance
|
0.22 µF
|
|
Permissible mounting orientations
|
Vertical hanging: Yes; Horizontal face‑up: Yes; Horizontal standing: No
|
|
Operating temperature
|
Nominal 5–40 °C, Max. 55 °C
|
|
Storage temperature
|
–25 to +55 °C
|
|
Transport temperature
|
–25 to +70 °C
|
|
Relative humidity (operating)
|
5–85 %
|
|
Altitude
|
Nominal 0–500 m, Max. 4000 m
|
|
Mandatory accessories
|
Terminal block set 8BZVI0440S0.000‑1A (screw clamp)
|
Functional Features:
-
Integrated safety: uncontrolled stops and safe stop embedded
-
Integrated connection for motor, holding brake, and temperature sensor
-
2 slots for ACOPOSmulti plug‑in modules
-
Digitally filtered trigger inputs with sub‑100 µs response
Working Principle:
As a single‑axis inverter, the module converts DC bus power into controlled 3‑phase AC for the servo motor. Safety functions are achieved through internal evaluation of the isolated trigger inputs, forcing a safe state (uncontrolled stop or safe stop) upon activation.
Application Scenarios:
-
Single‑axis high‑power servo drives in ACOPOSmulti systems
-
Machine tools, robotics, heavy packaging and material handling
-
Applications requiring integrated functional safety up to SIL/PL ratings documented in the user manual
Installation Requirements:
-
Wall‑mounting only; vertical orientation mandatory
-
Mandatory terminal block set 8BZVI0440S0.000‑1A must be fitted
-
Maintain minimum clearances for cooling (vertical hanging or horizontal face‑up only)
-
Install at altitude ≤ 500 m for full rated power without derating
-
Use POWERLINK/Ethernet connection cables (e.g., X20CA0E61 series) for network interface
Usage Precautions:
-
Never operate in “horizontal standing” orientation – cooling will be insufficient
-
Standby losses of 10.3 W mean the module dissipates heat even when idle; ensure cabinet ventilation
-
Safety classifications achievable are documented in the ACOPOSmulti user manual – follow precisely
-
The module width occupies 2 slots in the ACOPOSmulti mechanical layout
Reviews
There are no reviews yet.