Product Short Description
Product Introduction
This medium-power servo drive is designed for medium-load industrial motion control. It adopts digital vector control technology, supports multiple control modes, and is matched with Kollmorgen servo motors to realize stable and high-precision motion control. It is widely applied in medium-load automated equipment requiring high dynamic response.
Description
- Input Voltage: 240 VAC single/three-phase, 50/60 Hz
- Rated Output Power: 3.0 kW
- Rated Output Current: 14 A
- Overload Capacity: 150% rated current for 60 s
- Control Modes: Position, Speed, Torque
- Encoder Compatibility: Incremental encoder
- Cooling Mode: Natural air cooling
- Mounting Type: Vertical panel mounting
- Operating Temperature: 0 °C ~ +50 °C
- Standard three closed-loop control modes for industrial motion control
- High dynamic vector control algorithm, fast response to command changes
- Built-in overvoltage, undervoltage, overcurrent, overheat and phase loss protection
- Pulse and bus dual command input modes
- Parameter lock function to prevent misoperation
- Fault record storage and one-click parameter reset
- Electronic gearing for multi-axis synchronous operation
- Speed Regulation Range: 0 ~ 5500 rpm
- Speed Regulation Ratio: 1:4800
- Speed Stability Accuracy: ±0.012%
- Dynamic Response Time: ≤ 1 ms
- Peak Overload Current: 21 A
- MTBF: ≥ 400,000 hours
- Shell: Cold-rolled steel sheet with anti-rust paint
- Heat Sink: High thermal conductivity aluminum alloy
- Power Unit: Industrial IGBT module
- Control Board: FR-4 multilayer circuit board
- Terminals: Copper alloy with tin plating, flame-retardant plastic base
- Internal Capacitors: Long-life industrial electrolytic capacitors
- Vertical installation structure, standard mounting hole position
- Front operation panel with keys, display and status indicators
- Independent partition for power wiring area and signal wiring area
- Large-area integrated heat sink at the bottom for heat dissipation
- Isolated layout of power circuit and control circuit to enhance anti-interference
- Compact structure, saving cabinet installation space
The input AC power is rectified into DC power by the internal rectifier bridge. The PWM inverter circuit converts DC into variable-frequency three-phase AC to drive the servo motor. The encoder collects motor operating data and feeds back to the control unit. The main controller executes PID operation according to command and feedback signals to adjust output voltage and frequency, realizing closed-loop control. The protection circuit monitors operating status in real time and executes protection action once abnormal parameters are detected.
- Matched for 3.0 kW medium load, strong load adaptability
- Fast dynamic response, suitable for high-frequency reciprocating motion
- Stable operation and low failure rate
- Rich interface configuration, easy to connect with upper controllers
- Natural cooling structure, low maintenance cost
- High anti-interference capability for complex industrial sites
Automated assembly lines, material handling machinery, food processing equipment, rubber and plastic machinery, medium-sized automation production equipment
- Vertically fix on rigid metal panel or cabinet wall with standard bolts.
- Ensure unobstructed ventilation around the drive for heat dissipation.
- Use shielded cables for encoder and control signal lines.
- Complete reliable grounding construction.
- Keep away from strong vibration and heat sources.
- Prohibit continuous long-time overload operation.
- Perform all wiring work after power cut.
- Regularly clean dust on heat sink and panel surface.
- Do not disassemble the drive privately.
- Address fault codes per official troubleshooting guidelines when alarms occur.
Reviews
There are no reviews yet.