Product Short Description
Product Name: B&R 5AP1120.0702-000 Industrial Display Module
Product Series: B&R 5AP Series Industrial Display Unit
Product Brief: Dedicated industrial display module for embedded equipment and control cabinets. It is used to display equipment operating parameters, status information and alarm content, matching with B&R control system to complete local data visualization.
Description
- Supply Voltage: 24 V DC ±10%
- Display Type: Industrial LCD segment & character display
- Operating Temperature: -10 °C ~ +60 °C
- Storage Temperature: -25 °C ~ +75 °C
- Relative Humidity: 10% ~ 85% RH (Non-condensing)
- Data Interface: Parallel industrial data interface
- Refresh Rate: 50 Hz
- Real-time display of operating parameters, set values and equipment status
- Code display for fault alarm and prompt information
- Backlight adjustable for different ambient brightness
- Data signal receiving and decoding from main controller
- Long-term stable display for continuous working mode
- Total Power Consumption: ≤ 5.5 W
- Backlight Service Life: ≥ 50000 hours
- Vibration Resistance: 5 Hz ~ 140 Hz, 0.7 g
- Display Response Time: ≤ 100 ms
- MTBF: ≥ 92000 hours
- Display Panel: Industrial LCD liquid crystal panel
- Drive Board: FR-4 small-size control PCB
- Enclosure: High-strength ABS plastic frame
- Backlight Component: Industrial LED backlight assembly
- Terminal Part: Integrated plastic terminal socket
- Compact embedded rectangular structure
- Front integrated display area and fixed installation holes
- Rear centralized data and power terminals
- Integrated backlight drive circuit inside the module
- Sealed front frame for dustproof protection
The module receives display data and control signals from the main controller through the rear interface. The drive circuit decodes signals and drives LCD panel and backlight to present characters, numbers and alarm codes. It keeps real-time data refresh to synchronize with equipment operating status.
- Low power consumption, energy-saving for long-term operation
- Wide working temperature range, adapt to industrial cabinet environment
- Compact embedded structure, suitable for narrow installation space
- Simple wiring and easy system matching
- High contrast display, clear reading under workshop light
Small and medium automation machinery, on-site control box, portable detection equipment, textile machinery, packaging machinery, hydraulic control equipment
- Embed and fix on equipment panel or control box with dedicated holes
- Tighten fixing parts evenly to avoid panel deformation
- Use matched dedicated cables for power and signal connection
- Install position avoid direct strong light irradiation
- Reserve small gap for natural heat dissipation
- Do not apply strong impact or extrusion on display surface
- Wipe surface with dry soft cloth, do not use corrosive liquid
- Do not supply voltage beyond rated 24 V DC range
- Cut off power before disassembly and wiring
- Replace backlight timely when brightness obviously decreases
Reviews
There are no reviews yet.