GE IC693MDL752 Series 90-30 32-Point Negative Logic Digital Output Module

Description

Technical Specifications

• Manufacturer: General Electric (GE Fanuc / Emerson Automation Solutions)
• Series: Series 90-30 PLC System
• Model: IC693MDL752
• Module Type: Digital Output Module (Negative Logic / Sinking)
• Number of Outputs: 32 points (4 isolated groups × 8 points each: A1–A8, B1–B8, C1–C8, D1–D8)
• Operating Modes:
  • TTL Mode: +5VDC (4.75–5.25VDC), 25mA sinking per point
  • 12/24V Mode: +12VDC to –24VDC (12V +20%/–15%; 24V +20%/–15%), 0.5A sinking per point
• Output On-State Voltage Drop: ≤0.24VDC (12/24V mode)
• Off-State Leakage Current: ≤0.1mA per point
• Response Time: ≤0.5ms (ON/OFF)
• Group Current Draw (User Supply):
  • 5VDC: 12mA max per group (all 8 outputs ON)
  • 12VDC: 25mA max per group (all 8 outputs ON)
  • 24VDC: 44mA max per group (all 8 outputs ON)
• Backplane Power Consumption: 260mA max @ +5VDC (logic power)
• Terminal Type: Removable screw terminal block (requires IC693ACC310 terminal kit)
• Wire Gauge: 14–22 AWG
• LED Indicators: 32 green channel LEDs (ON = active), 1 green “OK” LED (module healthy)
• Isolation: Groups isolated from backplane and each other; 1500VAC isolation between groups
• Operating Temperature: 0°C to +60°C (32°F to 140°F)
• Storage Temperature: -40°C to +85°C (-40°F to 185°F)
• Relative Humidity: 5%–95%, non-condensing
• Dimensions (H×W×D): 102mm × 86.1mm × 58.5mm (4.02in × 3.39in × 2.3in)
• Weight: 0.3kg (0.66lbs)
• Certifications: CE, UL 508, CSA C22.2 No. 142

Key Features

1. High-Density 32-Point Output: Maximizes I/O capacity in a single slot, reducing system cost and cabinet space.
2. Dual-Mode Operation: Switchable TTL (+5V) and 12/24V modes support both low-power logic and industrial loads.
3. Four Isolated Groups: Electrical isolation between groups prevents cross-group noise and fault propagation.
4. Sinking (Negative Logic) Outputs: Active-low ON state compatible with standard DC load wiring practices.
5. High Current Capacity: 0.5A per point in 12/24V mode drives solenoids, relays, and small motors directly.
6. Fast Response Time: ≤0.5ms switching speed supports high-speed sequencing and motion control applications.
7. LED Status Feedback: Individual channel LEDs enable immediate troubleshooting; “OK” LED confirms module health.
8. Removable Terminal Block: Simplifies wiring and maintenance; supports 14–22 AWG industrial wiring.
9. Backed by Industrial Reliability: Rugged IP20 housing withstands vibration, temperature fluctuations, and electrical noise.
10. Seamless Integration: Compatible with all Series 90-30 CPUs; configured via standard PLC programming software with no special setup.

Applications

• Factory Automation: Control of pneumatic solenoids, contactors, and motor starters in assembly lines and material handling systems.
• Packaging Machinery: High-speed driving of valves, actuators, and indicators for filling, sealing, and labeling equipment.
• Process Control: On/off control of heaters, pumps, and valves in water treatment, food & beverage, and chemical processing plants.
• Building Automation: Management of HVAC dampers, lighting relays, and security system actuators in commercial buildings.
• Machine Tools: Control of spindle relays, coolant valves, and limit switch indicators in CNC and metalworking equipment.
• Legacy System Upgrades: Direct replacement for older Series 90-30 output modules, expanding I/O capacity without full system redesign.

Compatibility

• PLC Series: GE Fanuc Series 90-30 (compatible with all Series 90-30 CPUs including IC693CPU350, IC693CPU360, IC693CPU374).
• Baseplates: All Series 90-30 5-slot and 10-slot baseplates (e.g., IC693CHS398, IC693CHS397).
• Programming Software: Proficy Machine Edition (PME), Logicmaster 90-30, VersaPro.
• Accessories: IC693ACC310 (terminal kit), IC693CBL305 (communication cable for system integration).